3D Printer Directory may earn a commission when you buy through links on our site. As an Amazon Associate we earn from qualifying purchases.

The Bambu Lab P2S is the 2025 follow-up to the Bambu Lab P1S. The two printers share the same 256 x 256 x 256 mm build volume and the same CoreXY layout, so this is a comparison of refinements, not a generational leap. The real question is whether the refinements are worth the price gap on the day you buy.

A note on sourcing: we have not hands-on tested either printer. Everything below comes from Bambu Lab’s published specs as relayed by reviewers, plus published reviews from Tom’s Hardware, TechRadar, Hackster and others.

Quick verdict

  • Buy the P2S if the street price gap is modest. Reviewers consistently describe it as the better default for a new buyer: touchscreen, better camera, hardened parts, easier nozzle swaps.
  • Buy the P1S if it is on sale well below the P2S and you mostly print PLA and PETG. Print quality and build volume are reported as essentially the same.
  • Already own a working P1S? Two reviewers (Hackster and 3DMag) say to keep it unless a specific feature matters to you.
  • Want multi-color? Compare combo to combo, not combo to base printer. See the combo section below.

What actually changed

Extruder and hotend

The P2S uses a servo-driven (PMSM) extruder. Tom’s Hardware lists a maximum extrusion force of 8.5 kg, about 70% more than the old system, and TechRadar says it detects clogs and grinding in real time. The P2S hotend is a quick-swap assembly that changes without tools, and the P2S supports 0.2, 0.4, 0.6 and 0.8 mm nozzles according to 3DMag. The P1S uses a screw-in hotend that takes more effort to service.

Hardened nozzle and gears

The P2S ships with a hardened steel 0.4 mm nozzle and hardened extruder gears, per Tom’s Hardware and 3DMag. The P1S ships with a stainless steel nozzle, and 3DMag notes the stock P1S is not recommended for carbon- or glass-fiber-filled filament. A P1S can run some of those materials after a hardened nozzle upgrade, so this is a convenience gap, not a hard limit.

Screen, camera and storage

The P2S has a 5-inch color touchscreen. The P1S has a small monochrome screen with buttons, which Hackster calls less pleasant to use. The P2S camera records 1080p live view at 30 fps, against 720p at roughly 0.5 fps on the P1S (3DMag, Makers101). The P2S also adds a USB port, where the P1S relies on a microSD card (Tom’s Hardware). TechRadar notes the P2S has no Ethernet port.

Chamber and airflow

Neither printer has an active chamber heater. The P2S adds Adaptive Airflow, which Tom’s Hardware says lets you print with the door closed across materials. 3DMag reports passive chamber warming up to 50 °C for the P2S, and Hackster’s reviewer found it clearly better than the P1S at holding enclosure temperature for materials like ABS. If you plan to print ABS or ASA seriously, neither machine is a heated-chamber printer, so manage expectations.

Motion, speed and bed

Published top toolhead speed is 600 mm/s on the P2S and 500 mm/s on the P1S. Acceleration is listed at 20,000 mm/s² for both. The P2S heatbed reaches 110 °C versus 100 °C on the P1S, and the P2S swaps the P1S’s carbon rods for smooth steel rods (Tom’s Hardware). Hackster’s reviewer saw no clear print-quality difference between them, and Makers101 calls quality nearly identical.

AI monitoring and calibration

The P2S adds enhanced AI failure detection and automatic flow calibration, and TechRadar mentions an eddy-current sensor used for flow adjustment. The P1S has basic spaghetti detection and relies more on manual tuning.

Spec comparison

Spec Bambu Lab P1S Bambu Lab P2S
Site list price $699 $549
Build volume 256 x 256 x 256 mm 256 x 256 x 256 mm
Max toolhead speed 500 mm/s 600 mm/s
Acceleration 20,000 mm/s² 20,000 mm/s²
Extruder Direct drive, stepper Direct drive, PMSM servo
Stock 0.4 mm nozzle Stainless steel Hardened steel
Hotend change Screw-in Tool-free quick swap
Max nozzle / bed temp 300 °C / 100 °C 300 °C / 110 °C
Screen 2.7-inch monochrome, buttons 5-inch color touchscreen
Camera 720p, low frame rate 1080p, 30 fps
File transfer microSD, Wi-Fi USB, Wi-Fi, Bluetooth
Active heated chamber No No
Airflow Standard cooling Adaptive Airflow

The list prices are the regular prices shown in our directory. Street prices often run lower, and the P1S in particular has been sold well below its list price for long stretches (see below). Spec sources: Tom’s Hardware, 3DMag, Makers101.

Combo and AMS options

Multi-color printing on either machine needs an AMS unit, and the combo you pick matters more than the printer for the final price.

  • P2S Combo: includes the AMS 2 Pro, which has built-in filament drying and an RFID reader (TechRadar). Reviewers report support for chaining multiple AMS units for up to 20 filament slots. Bambu’s US store lists the P2S Combo at a regular price of $749 (checked November 2026), and it is frequently discounted, so check the P2S listing for the current offer.
  • P2S standalone: no AMS. You can add an AMS 2 Pro later (listed at $299).
  • P1S combos: All3DP’s coverage of Bambu’s June 2026 sale lists a P1S Combo with the original AMS and a P1S Combo with the AMS 2 Pro, so you can choose between the older and newer unit. Makers101 notes the AMS 2 Pro version gives a P1S active filament drying.

The practical advice: compare combo to combo with the same AMS model, and add up the delivered total. Multi-color prints on either printer produce purge waste, which TechRadar and Tom’s Hardware both flag for the P2S.

Who should still buy the P1S

The P1S list price in our directory is $699, but that is not what it has usually sold for. Tom’s Hardware reported it at $399 in January 2026 (marked down from $699), and All3DP reported a $369 P1S during Bambu’s June 15 to July 15, 2026 anniversary sale, noting the printer had not sold at $699 for months. Bambu’s 2025 Black Friday sale also had it at $399. These are past sale prices, not current offers, so confirm on the listing page.

The P1S is the smarter buy if:

  • You mostly print PLA, PETG and similar everyday materials and do not need fiber-filled filament out of the box.
  • The sale price leaves a meaningful gap to the P2S, which you can spend on filament, spare nozzles and plates.
  • You are comfortable with a smaller screen and lower-resolution camera. Hackster’s reviewer recommends the P2S for new buyers because it costs only modestly more, so the case for the P1S gets stronger as that gap widens.

Makers101 reports that Bambu has said the P1S will continue to be made and sold, so buying one now does not mean buying a dead-end product.

Who should buy the P2S

  • You want the better day-to-day experience: touchscreen, sharper camera, easier nozzle swaps.
  • You expect to try carbon- or glass-fiber filaments, since the hardened nozzle and gears are stock.
  • You want to print ABS or similar with the door closed, and value the airflow and warmer enclosure.
  • The price gap on the day you shop is small.

Frequently asked questions

Is the P2S faster than the P1S?

On paper, slightly. The published top toolhead speed is 600 mm/s versus 500 mm/s, and acceleration is the same 20,000 mm/s². Those are manufacturer ceilings, not typical print speeds, and reviewers do not report a clear quality difference.

Can the P1S use the AMS 2 Pro?

Coverage of Bambu’s June 2026 sale lists a P1S Combo with the AMS 2 Pro (All3DP), and Makers101 describes it. Check the AMS 2 Pro listing and Bambu’s compatibility page before buying it separately.

Does either printer have a heated chamber?

No. Both rely on a passively warmed enclosure. The P2S adds Adaptive Airflow and a reported 50 °C passive chamber figure, but neither is a heated-chamber machine.

Should a P1S owner upgrade?

Probably not. The build volume is unchanged, and Hackster and 3DMag both advise working P1S owners to stay put unless the screen, camera, hardened parts or bed temperature would change how they print.

Sign In

Register

Reset Password

Please enter your username or email address, you will receive a link to create a new password via email.