3D Printer Directory may earn a commission when you buy through links on our site. As an Amazon Associate we earn from qualifying purchases.

You can get a fast, reliable, even multi-color 3D printer for under $500 in 2026. The hard part is picking between a handful of strong options that each do something different. This guide covers five printers from our directory whose regular list price is $500 or less, with a “best for” label on each.

We have not hands-on tested these machines. Specs and opinions below come from manufacturer pages and published reviews (mainly Tom’s Hardware, plus others noted in the text). Prices marked “list price” are the regular prices on our listing pages. Street prices often run lower, especially around Black Friday, so check each listing for current buy links.

Quick picks

How we picked

We limited the list to printers in our directory with a regular list price of $500 or less, then leaned on published reviews for speed, ease of use, and known drawbacks. We also weighed three things buyers tend to regret: no enclosure when they wanted one, no multi-color path when they wanted one, and a confusing setup. Where a review did not state something (for example, whether a printer is enclosed), we say so instead of guessing.

1. Elegoo Centauri Carbon: best overall

Elegoo Centauri Carbon (list price $299.99) is a fully enclosed CoreXY printer with a 256 x 256 x 256 mm build volume. Tom’s Hardware gave it an Editor’s Choice award, called it the best out-of-the-box experience it has had with an Elegoo FDM printer, and named it its pick for the fastest affordable printer of 2025. It does not require cloud access.

Trade-offs: there is no heated chamber (Tom’s measured the chamber at 41 °C after 20 minutes), the smooth plate side has weak grip at the suggested 30 °C, and the original model does not do multi-color. The stock nozzle is a high-flow brass one, with a hardened nozzle offered as an option by Elegoo. Tom’s Hardware’s review suggested the Bambu Lab P1S with its AMS for full-color printing; Elegoo has since released the Centauri Carbon 2 with a four-color system built in.

2. Elegoo Centauri Carbon 2: best for multi-color

Elegoo Centauri Carbon 2 (list price $449) keeps the same 256 x 256 x 256 mm volume and fully enclosed body, and adds a four-color Canvas system fed through PTFE tubes. Tom’s Hardware lists a hardened steel nozzle rated to 350 °C and a bed up to 110 °C.

Trade-offs: the review notes no active heated chamber, spool holders that do not fit many third-party spools well, a cold plate that is not very sticky, and a loading routine that does not get hot enough to purge high-temperature filaments like PC and nylon. It is also a new machine, not an upgrade for the original Centauri Carbon.

3. Bambu Lab A1: best for beginners

Bambu Lab A1 (list price $399) is an open-frame “bed slinger” with a 256 x 256 x 256 mm build volume, a 500 mm/s top speed and 10,000 mm/s² acceleration. Tom’s Hardware calls it a reliable, quiet, high-speed printer at a competitive price and praises the interface, quick-change nozzles, direct drive extruder and automatic bed leveling.

Trade-offs: there is no enclosure option, which limits materials like ABS. The optional AMS Lite adds four-color printing, but Tom’s notes it takes up desk space, wastes filament, cannot handle TPU, and is not compatible with Bambu’s CoreXY printers. If you may want an enclosed Bambu later, see the stretch picks below.

4. Bambu Lab A1 mini: best for small desks

Bambu Lab A1 mini (list price $299) shares the A1’s 500 mm/s top speed and 10,000 mm/s² acceleration but has a smaller 180 x 180 x 180 mm build volume. Tom’s Hardware calls it a fast, quiet, easy “budget bed slinger” and recommends the standalone version for beginners.

Trade-offs: the small volume suits practical parts, miniatures and gifts but not large prints. Tom’s describes it as a bed slinger and does not mention an enclosure, and the optional AMS has the same space and waste downsides as on the A1.

5. Creality Ender-3 V3 SE: best under $200

Creality Ender-3 V3 SE (list price $199) has a 220 x 220 x 250 mm build volume, automatic bed leveling and a direct drive extruder. Tom’s Hardware rates it at 250 mm/s (about 150 mm/s in normal printing) and calls it beginner-friendly, with roughly 15 minutes of assembly.

Trade-offs: no Wi-Fi (files go over SD card), a build plate that is hard to clean and somewhat sticky, and no multi-color path. It is the pick when budget matters most.

Worth stretching for: P1S and P2S

If you want a fully enclosed Bambu printer, the list prices are above $500: Bambu Lab P1S at $699 and Bambu Lab P2S at $549. But the P1S has been discounted heavily and often. Tom’s Hardware reported it at $399 in January 2026, All3DP reported $369 during Bambu’s June 2026 anniversary sale, and the 2025 Black Friday sale had it at $399. For the P2S, All3DP reported a $499 sale price in June 2026, which Bambu called its first-ever P2S discount, so we would not call it commonly under $500. These are past sale prices, not current offers. Our Bambu Lab P2S vs P1S comparison covers which one to pick.

Left off the list

We left out the Creality Hi Combo because its regular list price is $599 (Tom’s Hardware’s review gives the same figure), with sales below that. It is open-frame according to 3D With Us. If it drops under $500 when you shop, it is worth a look as a four-color option, but Tom’s suggested the Bambu Lab A1 combo as a cheaper color route.

Frequently asked questions

Do I need an enclosed printer?

For PLA and PETG, not necessarily. An enclosure helps with ABS-style materials and with keeping drafts and noise down. Of the five picks, only the two Elegoo Centauri Carbon models are described as fully enclosed in the reviews we read. None of the five has an active heated chamber.

Is a combo worth it?

If you know you want multi-color, a combo gets you the multi-color unit in one purchase. If not, a base printer plus extra filament can be the better use of money. Multi-color systems on every printer here create purge waste.

Are these list prices what I will pay?

Not necessarily. Our list prices are regular prices, and street prices often run lower, particularly during Black Friday. We do not track live deals, so check the listing pages for current buy links.

What is the cheapest sensible first printer?

The Creality Ender-3 V3 SE at $199 list. If you can spend $100 more, the Bambu Lab A1 mini ($299) or the Elegoo Centauri Carbon ($299.99) are the next step up, and the Centauri Carbon adds an enclosure.

Sign In

Register

Reset Password

Please enter your username or email address, you will receive a link to create a new password via email.